کاربرد روش‌های یادگیری ماشین برای بهینه‌سازی پارامترهای سنتز ذرات نقاط کوانتومی GaN قابل کاربرد در آشکارساز‌های نوری فرابنفش

نوع مقاله : مقاله پژوهشی

نویسندگان

1 گروه فیزیک، دانشکده علوم پایه، دانشگاه علوم و فنون هوایی شهید ستاری، تهران، ایران.

2 گروه فیزیک،دانشکده ی علوم پایه، دانشگاه علوم و فنون هوایی شهید ستاری، تهران، ایران.

چکیده
آشکارسازی صحیح نور فرابنفش (UV) یک مسئله‌ی مهم در توسعه‌ی فناوری‌های نوری-الکترونیکی به‌شمار می‌رود. مواد نیمه‌هادی مرسوم که به‌طور معمول در ساخت آشکارسازهای نوری فرابنفش به‌کار برده می‌شوند دارای محدودیت‌هایی به‌لحاظ سرعت پاسخ، هزینه و پیچیدگی‌های ساخت می‌باشند. این در حالی است که آشکارسازهای نوری فرابنفش مبتنی‌بر ذرات نقاط کوانتومی (QDs) به‌دلیل ویژگی‌های نوری و الکترونیکی منحصر‌به‌فرد می‌توانند بر این محدودیت‌ها غلبه کنند. با این حال، سنتز این نانوذرات به‌طور معمول مبتنی‌بر رویکردهای آزمون و خطا می‌باشد. در این پژوهش، با استفاده از مدل های یادگیری ماشین و اطلاعات استخراج شده از مقالات علمی به بررسی و پیش‌بینی مهم‌ترین متغیرهای تاثیرگذار بر سنتز GaN QDs قابل کاربرد در ساخت آشکارسازهای نوری فرابنفش پرداخته شده است. نتایج بدست آمده از الگوریتم‌ AdaBoost نشان می‌دهد که متغیرهای نسبت مولی Ga/N، نسبت شار آلومینیوم به فلز، زمان و دمای رشد، مهم ترین متغیرهای موثر بر پهنای باند GaN QDs به‌شمار می روند. هم‌چنین، الگوریتم AdaBoost برای پیش بینی مقادیر بهینه‌ی متغیرهای کلیدی واکنش در دامنه های دلخواه از پهنای باندGaN QDs به‌کار برده شده است.

کلیدواژه‌ها

موضوعات


عنوان مقاله English

Application of Machine Learning Techniques for the Optimization of Synthesis Parameters of GaN Quantum Dots for Utilization in Ultraviolet Photodetectors

نویسندگان English

Bahram Abedi Ravan 1
Bahram Daalwand 2
1 Faculty of Basic Science, Shahid Sattari University of Aeronautical Sciences and Technology, Tehran, Iran.
2 Faculty of Basic Science, Shahid Sattari University of Aeronautical Sciences and Technology, Tehran, Iran.
چکیده English

Accurate ultraviolet (UV) photodetection is a critical issue in the development of optoelectronic technologies. Conventional semiconductor materials commonly used in UV photodetectors suffer from limitations in terms of response speed, cost, and fabrication complexity. In contrast, UV photodetectors based on quantum dots (QDs), owing to their unique optical and electronic properties, can potentially overcome these limitations. Nevertheless, the synthesis of these nanoparticles is typically based on trial-and-error approaches. In this study, using machine learning models and information extracted from the scientific literature, we investigate and predict the most influential variables governing the synthesis of gallium nitride (GaN) QDs applicable to UV photodetectors. The results obtained from the AdaBoost algorithm indicate that the Ga/N molar ratio, the aluminum-to-metal flux ratio, time, and growth temperature are the most important variables affecting the bandgap of GaN QDs. Moreover, the AdaBoost algorithm is employed to predict the optimal values of the key reaction variables within desired GaN QD bandgap ranges.

کلیدواژه‌ها English

Machine learning
Quantum Dots
Gallium Nitride
Ultraviolet Photodetector
دوره 4، شماره 4
زمستان 1404

  • تاریخ دریافت 25 فروردین 1405
  • تاریخ بازنگری 20 خرداد 1405
  • تاریخ پذیرش 21 خرداد 1405